| |
1
Take the Stopkit out of its wrapper without removing the PE protection of the sashes. |
2
Pre-assemble the Stopkit near to the leak in a way free to be moved. |
3
Screw softly the 2 bolts. |
4
Slide the Stopkit over the leak. Center it according to the hole or the fissure. |
5
Screw alternatively the nuts using a dynamometric spanner up to 40Nm. Screw the anti vibration nuts. |
| Steps to STOPKIT PERMANENT : |
6
Prepare the surface by both sides of the Stopkit for a better resin adherence. |
7
Install the Sleeve. |
8
Inject the resin. |
■ The composite "Sash and resin" reinforces the pipe.
■ The repair is considered permanent. |
