Add 3X to bookmark

Print this page

The specialist in pipe repair: leaks, corrosion and other defects

Home

3X distributors in the world

▼ Videos ▼

Test
STOPKiT
under pressure
70bars

STOPKiT
application

Stopkit
Subsea
application
1

Stopkit
Subsea
application
2

R-4D
application

MBX© Bristle Blaster
imple-mentation

Download

	3X Flyer
	STOPKiT Flyer
	REINFORCEKiT-4D Flyer
	REFLANGEKiT-SF6 Flyer
	MBX© Bristle Blaster Flyer
	MBX© ATEX conformity

Our clients

REINFORCEKiT 4D | REINFORCEKiT Watersleeve | STOPKiT | REFLANGEKiT SF6 | REFLANGEKiT Oil

	1°) Surface preparation
	- Define the work area - Preparation Type SA 2 ½ with roughness> 60 microns - Degrease	Material: - Sander / blast - MBX 3X - Degreaser Control: - Preparation uniform - Roughness

	2°) Isolation of the leak
	- Place the double-sided as the bolts - Install flexible formwork - Position the valve if necessary	Material: - Double sided - Flexible Formwork Control: - No leak - Evacuation of the fluid only by the valve

	3°) Installation of the insert
	- Set the insert around the flange	Material: - Metal insert 3X Control: - Centering of the insert - Access to the valve

	4°) Installation of formwork
	- Centering the formwork - Position and tighten the straps	Material: - 3X formwork - Straps Control: - Centering and Adjustment - Evacuation of the fluid through the valve only

	5°) Injection of the resin
	- Fill-by-step form - Allow to polymerize 6h	Material: - 3X resin - Electric drill Control: - Expiration date - Uniformity of the mixture

	6°) Stopping the leak
	- Stop valve - Molded valve - Allow to polymerize	Material: - 3X resin - Plug valve Control: - No leak - Complete tracking sheet

3X Engineering : 9, avenue Albert II - 98 000 MONACO - Tel : + 377 92 05 79 81 - Fax : + 377 92 05 72 71 - E-mail : 3x@3xeng.com

Designed by niceweb.fr